Can't get brakes working after repair - 92 S4

[Carol, Dave, and Zach Weiss]

Cobram wrote:
>For some strange reason, on both my 200TQA and V8Q neither pressure
bleeding nor suction bleeding seems to get all the air out of the rear,
especially the drivers side caliper.  Good old fashioned 2 man pump and
bleed is the only way I could get the air out.
<<

I had a similar problem on my V8 a while back, also couldn't get much
fluid flow out of the rears w/o pumping the brakes.  Front/rear valve
was stuck; shop pushed it back w/ compressed air and all has been well
for ~20k mi.

Dave Weiss
V8 5-speed