Hose clamps

[Eric_R_Kissell at whirlpool.com]

If the screw clamp is actually loosening, then maybe a drop of Blue Loctite
would reduce the problem.  I do not know if a hose clamp thread is
anaerobic enough for Loctite to be effective.

If the hose material is creeping away under compression, maybe tightening
the clamps while the hoses are warm would allow more of the potential creep
to be overcome during tightening.

My hose have not arrived yet :-(
so I do not have this problem :-)
yet :-(

Eric Kissell
1991 200q 20v Avant, Ebay Surprise
1989 200q 10v Avant, 1.8 Bar - FOR SALE
1986 5000cstq Sedan, 1.8 Bar, Bilsteins