Torqueing knock sensor/crow's foot

[Doug Johnson]

Not correct, technically, Chris.

In a minute amount, if the "length" of the crow's foot extends the length of
the torque wrench, it will affect the accuracy of the torque wrench.

Granted, since the "length" of the crow's foot, compared to the length of
the wrench, is minimal, the effect is minimal.

FWIW,

~ Doug
 

> -----Original Message-----
> From: quattro-bounces at audifans.com 
> [mailto:quattro-bounces at audifans.com] On Behalf Of Flanner, Chris
> Sent: Tuesday, April 06, 2004 8:01 AM
> To: quattro at audifans.com
> Subject: Torqueing knock sensor/crow's foot 
> 
> To summarize my last post, using a crow's foot on a torque 
> wrench (in any position) does not affect the accuracy of the 
> reading.  Who's with me?  Who's against me? ;)
> 
> Chris
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
>