Torqueing knock sensor/crow's foot

[Alan Pritchard]

Oh no!!! not this topic again!!!!!!!!!!!
Search through the archives on the thread regarding crankshaft
tightening!!!!
I don't think I can take this again!!!!
hehe

 -----Original Message-----
From: 	Flanner, Chris [mailto:cflanner at aosmith.com] 
Sent:	06 April 2004 16:24
To:	quattro at audifans.com
Subject:	Torqueing knock sensor/crow's foot

Doug,

 

I would argue that, neglecting friction at the fastener, a crow's foot
that put the bolt center even 3 feet out from the torque wrench head
would not affect the indication of the torque wrench.  If the torque
indicated by the wrench (torque at the torque wrench head) were
different from the torque applied to the fastener, the system would not
be in static equilibrium and would be accelerating.  No?

 

Chris

_______________________________________________
quattro mailing list
quattro at audifans.com
http://www.audifans.com/mailman/listinfo/quattro