Socket for tourquing know sensor ???

[David]

My knock sensor has the wire coming off one side and the bolt goes through a hole in the middle. Maybe it's different on other cars?

Dave
87.5 CGT
SE Virginia
============================================================
From: "Cody" <Cody at mail.craincorporated.com>
Date: 2004/04/06 Tue AM 09:35:42 EDT
To: <quattro at audifans.com>,  David  <duandcc_forums at cox.net>
Subject: Re: Socket for tourquing know sensor ???

What about the wire? Seems to me that it would be just like an O2 sensor where you can't put a socket on it because of the meter of wire that's permanently attatched.

-Cody Forbes
http://www.500tq.com
'86 5ktq
'87 5ktq EFI/K27
'88 80 4cyl
'88 90 4cyl


---------- Original Message ----------------------------------
From: David <duandcc_forums at cox.net>
Date: Tue, 6 Apr 2004 8:27:55 -0400

>At least on my NG powered car, it did not take a special socket. A normal socket and a GOOD torque wrench is all I neeeded....
>
>Dave
>87.5 CGT
>SE Virginia
>============================================================
>From: Konstantin Bogach <konstantin.bogach at morganstanley.com>
>Date: 2004/04/05 Mon PM 04:41:17 EDT
>To: quattro at audifans.com
>Subject: Socket for tourquing know sensor ???
>
>Folks,  what are you using to torque knock sensors?  Is there a 15mm 
>socket with cut out like for OXS available?   Any hints on where to get it?
>Thanks.
>Konstantin.
>
============================================================