Injector mounting in manifold.

[Jim Green]

--- Ben Swann <benswann at comcast.net> wrote:
> I'm following up on thest questions.
> 
> I'm toying with putting a cold start injector in the
> place where the air
> temp sensor is and using the boss in the manifold
> for the air temp sensor.
> It seems that this should work fine, as the boss was
> used for the temp
> sensor on earlier cars.
> 
> So questions are:
> 
> 1)  Will the inlet air temp sensor should work fine
> if located in the boss
> on the manifold just past the throttle body?
> 
> 2)  Will a cold start injector work fine as a
> supplementary injector, or
> should I procure an alternate injector?  What
> alternative can be used if
> need be - it would be nice to find one that fits the
> mounting of the CS
> injector.

I'm not sure the cold start injector was designed to
be pulsed at a high speed, and I'm not sure if the
resistance is right.  I'd use something like this.
http://www.atpturbo.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=ATP-FUL-013&Category_Code=FUL



=====
Jim Green
'89 90tq
'89 80q
http://www.mswanson.com/~jgreen/car_home.html

__________________________________
Do you Yahoo!?
Yahoo! Small Business $15K Web Design Giveaway 
http://promotions.yahoo.com/design_giveaway/