fuel injector inserts

[Ameer Antar]

Good idea for the tool... but how about using M8 hardware. I think M8 nuts and bolts require 13mm tools exactly. M8 stuff should be just as easy to find in any hardware store, esp. in Canada. good luck.

-Ameer

----Original Message----

Date: Mon, 19 Apr 2004 19:43:08 -0300
From: "millertyme" <mlrtym at nbnet.nb.ca>
Subject: RE: fuel injector inserts 
To: "'Kurt Deschler'" <desch at alum.wpi.edu>
Cc: quattro at audifans.com
Message-ID: <02af01c4265f$b051b570$0200a8c0 at dad>
Content-Type: text/plain;	charset="us-ascii"

Kurt,
I have all the new items coming in tomorrow am.  Hope to get them all
replaced after work.  How deep does the allen wrench go into the
injector holder?
I don't have one that size so I will be using a 5/16 bolt (1/2" head)
with a nut welded at the appropriate depth for turning out the insert.
And for the seals, I picked up a bottle of silicon based o-ring
lubricant.  Wont deteriate the rubber, and it goes in slick as ....
Best stuff ive found yet.
Thanks again
Brian



-----Original Message-----
From: Kurt Deschler [mailto:desch at alum.wpi.edu] 
Sent: April 19, 2004 19:17
To: millertyme
Cc: quattro at audifans.com
Subject: Re: fuel injector inserts 


Replace all the o-rings and all the inserts. The insert should be the
red plastic ones. They clip onto the brass holders so they should come
out together. They are most likely to break putting the injector back
in. Total parts should be around $20 with bosch viton holder o-rings.
You should do this job with the engine warm if at all possible since it
makes a huge difference to the hardness of the large injector o-rings
(even new ones). Sears has a 1/2" allen that works good for taking out
the inserts. Clean the brass injector holders with emory paper while
they are out. Lubricate the injector holder o-rings with plenty of gas
before attempting to put them back in. Do not attempt in the cold or you
will waste the holder o-rings and inserts (BTDT).

	Kurt
	87 5kcstq
	88 vw gti 16v
	00 s4


> Message: 9
> Date: Mon, 19 Apr 2004 15:41:55 -0400
> From: Huw Powell <audi at humanspeakers.com>
> Subject: Re: fuel injector inserts
> To: millertyme <mlrtym at nbnet.nb.ca>
> Cc: audi mailing list <quattro at audifans.com>
> Message-ID: <40842B83.6030303 at humanspeakers.com>
> Content-Type: text/plain; charset=us-ascii; format=flowed
>
>
> > i am ordering new injectors for my 87 5KT and wanted to get 
> > suggestions if i should replace the inserts as well?
>
> I'd plan on it, they may come out in rough shape.  And they should be 
> fairly cheap.
>
> > in regards to replacing them, i read that they come out with a 13mm 
> > allen wrench.  is this information correct?
>
> I think so.  I've seen so many different styles of plastic injector 
> housings that I can't remember what goes with whatengine, though.
>
> > also, do both inserts come out together, or are they seperate?
>
> See previous answer...
>
> --
> Huw Powell
>
> http://www.humanspeakers.com/audi
>
> http://www.humanthoughts.org/




------------------------------