Brake Master Cylinder - 5000

[Pat Korach]

Mike

If I remember correctly they are both
the same, other than the bore.  Pulled one
off of my 86  Wagon and it looked the same as the ones off of my old 84T and
887TQ.  The only diffrence I saw was 25mm had a 25 on the side of the
casting.

Hope this helps.

Pat Korach
Kirkland,WA
----- Original Message -----
From: <pshenm at att.net>
To: <quattro at audifans.com>
Sent: Tuesday, April 20, 2004 6:38 AM
Subject: Brake Master Cylinder - 5000


> So it looks like the brake master cylinder on my 5ktq sedan need to be
replaced.  Apparently the 5000 avants had a 25mm bore instead of the
standard 23mm on the sedans.  Anyone have any BTDT on fitting the Avant MC
into a Sedan?  I know people have fitted the larger MC on these cars when
upgrading to the ventilated rear brakes. I am concerned that the avant MC
won't fit correctly to the current sedan reservoir, and I'd like to order it
ASAP to get the 5k back on the road.
>
> Mike Pshenishny
> '87 5ktq
> '87.5 CGT
> '88 951
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
>
>