MAC-11B
S Dewitt
sdewitt at stx.rr.com
Thu Aug 5 21:57:46 EDT 2004
The 2113 error is your problem. If that error is being recorded by the ecu
the engine will not start.
You may want to check the camshaft timing as this error code will be
generated when the camshaft (hall sender) timing doesn't coincide with the
crankshaft sensors. You could also have a bad connection even though your
test light worked. The only way to really check it is using an
osilloscope(SP?).
Scott DeWitt
Advanced Automotion
817-939-6761
----- Original Message -----
From: "Jim & Michelle" <jimhill at blomand.net>
To: "S Dewitt" <sdewitt at stx.rr.com>
Sent: Thursday, August 05, 2004 7:56 PM
Subject: Re: MAC-11B
> Oh yeah I have checked codes. I get 2113, but I checked the sender with a
> l.e.d. test light and it seemed to check o.k. (light blinked)
> -----Original Message-----
> From: S Dewitt <sdewitt at stx.rr.com>
> To: Jim & Michelle <jimhill at blomand.net>
> Date: Thursday, August 05, 2004 7:26 PM
> Subject: Re: MAC-11B
>
>
> >I've had the same problem. My suggestion is to purchase a coil and ECU
and
> >replace both. Plugging a good component with a bad one will cause the
other
> >component to fail.
> >
> >Have you checked codes?
> >
> >Scott DeWitt
> >Advanced Automotion
> >817-939-6761
> >----- Original Message -----
> >From: "Jim & Michelle" <jimhill at blomand.net>
> >To: <quattro at audifans.com>
> >Sent: Thursday, August 05, 2004 7:04 PM
> >Subject: MAC-11B
> >
> >
> >Is there any place to send a MAC-11B ICU to get it checked and/or
repaired?
> >I've checked all my sensors and senders everything seems to point to the
> ICU
> >(no spark problem).
> >
> >Jim
> >_______________________________________________
> >quattro mailing list
> >quattro at audifans.com
> >http://www.audifans.com/mailman/listinfo/quattro
> >
>
More information about the quattro
mailing list