Tie Rod Replacement

[Huw Powell]

> - while waiting count the exposed threads on the tie rod ends so you can 
> install the new ones in close to the original position. Doing this I 
> have installed them so close to the original that no adjustment was 
> necessary on alignment.

I would recommend measuring the bolt to bolt length as well, just in 
case the threads vary from tie rod to tie rod.  Although, your track 
record is better than mine, so your method is probably better too!

-- 
Huw Powell

http://www.humanspeakers.com/audi

http://www.humanthoughts.org/