any Salt Lake listers? possible SOS

[Kneale Brownson]

There's a dealership near downtown Salt Lake City that did a decent job on
replacing a blown seal on the tranny of my 200q20v while I was there a
couple winters ago.  

I wouldn't think the midget spare would require different wheel bolts than
any OEM wheel it was intended to replace.

The clicking noise is the wheel cooling off after she stops driving?  I'd
suggest she find a solution before driving much more.

At 12:18 AM 8/28/2004 -0600, Keith Lawyer wrote:
>The gf's in the Salt Lake area this weekend, had an issue with a blown
>rear tire and now the stock small spare (I know, I know upgrade to a
>full size spare immediately) is reportedly making a clicking noise and
>quite hot to the touch.  This is about all I could determine over the
>fone w her.
>
>Unk if the parking brake is sticking (not uncommon), wheel bearing is
>going south or perhaps the longer lugs are causing an issue (does the
>steel spare require shorter lug bolts on a '90 200?)
>
>In any case she's near civilization but should things get worse it might
>be nice to have contact info for any SLC listers willing to help; help
>could even constitute a fone call to reco a good shop if wheel bearing
>replacement is req'd (I imagine lots of shops might have the tools, but
>perhaps not stock the bearing)