Save me the trouble - Audi part #

[Jim Haseltine]

I'd put money on it being one of these:
N 020 609 3  - D1 8x15 clip. It's the clip that holds the cold start 
injector pipe to the top of the inlet manifold and is also used on WX 
engines to hold the metal part of the CO test pipe.
Doubt that it's over expensive - worth ordering one on the off-chance I'd 
say.

Regards,

Jim Haseltine


----- Original Message ----- 
From: "Phil Payne" <quattro at isham-research.com>
To: <quattro at audifans.com>; <urq at audifans.com>
Sent: Monday, December 13, 2004 10:33 AM
Subject: Save me the trouble - Audi part #


> Anyone dealt with this yet?
>
> The WR ur-quattros (and many other early turbo I5s) have a pipe from the 
> exhaust manifold
> above the turbo to the wastegate.  As it passes the back of the inlet 
> manifold, it goes
> through a clip bolted to the inlet manifold.
>
> It's not even shown on the ur-quattro ETKA, but:
>
> ETKA A200/82/1/45 illustration 27-10 - item 16 is the securing bolt that 
> passes through the
> clearly visible clip.
>
> Audi want over $200 for this clip - "it's only available as part of the 
> complete pipe
> assembly".
>
> Yeah.  Anyone ever found a part number for it as a discrete component?
>
> -- 
>  Phil Payne
>  http://www.isham-research.com
>  +44 7785 302 803
>  +49 173 6242039
>
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
>