Replacing Fuel Distributor and Pressure Regulator

[SJ]

> From: "Marc Boucher" <mboucher70 at hotmail.com>
>
> I measured the resistance across the two poles of the differential
pressure regulator as you suggested.
>
> You suggested that it should measure 200 ohms.  Mine measures 18 ohms.
Yes my meter is on the correct scale...on the Rx1 scale I read it as 18
ohms.  On the Rx10 its about 2 or close to 20 ohms.

**** DPR resistance reading should be 17.5 to 21.5 ohms.

SJ