Differential Pressure Regulator[was No start WAS: FuelDistributor Connectors]

[Brendan K. Walsh]

>
> Perhaps, at least before asserting that they "can be exchanged", someone
> should at least *try* it.  Take a properly running system, of one type
> or the other, and swap in a known good CPA from the other system.  See
> if everything specs out correctly with no tweaking.  I suspect it won't.

BTDT, kind sorta works, not well in any case but i may have other
contributing issues. All other parts of my cis-e system have been tested and
seem to be functioning properly. Temp sender may be a little off, but i
digress.
Simple answer is that by looking at the input range on the dprs you can see
it won't, heres the problem. At idle the cis-e sends out 10mA correct? At
WOT the e3 sees the same input right?, so you would end up with a rich
mixture all the time. if you recalibrate the output on the pot  to 0mA the
ecu will still send siganl outside of the operating range of the dpr
02

"If God had intended us to walk he wouldn't have invented roller skates."
Gene Wilder, Willy Wonka and The Chocolate Factory.