Electrical schoolwork...

[Ti Kan]

Louis-Alain RICHARD writes:
> if it was feasible to replace only the bulbs: negative...). But now if I
> have to package a big 1W resistor IN the switch, it might me very
> challenging.=20

You're probably ok to raise the resistor value to limit the current a
bit further and just use 1/2W resistors.  Usually a factor of two
change in resistance only yields a marginal difference in perceived
brightness, assuming that both are within the LED's nominal operating
current range.

-Ti
2003 A4 1.8T multitronic
2001 S4 biturbo 6-sp
1984 5000S turbo
1980 4000 2.0 5-sp
-- 
 R 1 3 5  Ti Kan
 |_|_|_|  http://www.amb.org/ti
   | | |  Vorsprung durch Technik
   2 4 6