200 hydraulic pump rebuild

[Drew MacPherson]

Thanks Scott.  I did a search on the archives again for hydraulic pump and 
got some good hits.  When I tried it last week I wasn't having success but 
I suspect it was either user error or browser settings.

Drew

On Fri, 27 Feb 2004 SuffolkD at aol.com wrote:

> Drew:
> 
> Welcome aboard.
> Unfortunately in my archive search for you I pressed the download the 52Megs 
> archives by accident and there is NO STOP button.
> 
> So my suggestion is:
> I think Bernie has posted about a rebuild.  I think there are three others 
> too.
> The answer will pop up and I'll post it when i can search again.
> -Scott by BOSTON
> 
> > 
> > 2) the hydraulic pump is leaking - in persuing the archives I've learned
> > that this is not uncommon.  There is a rebuild kit (or a few o-rings and a
> > seal, anyways) available from the dealer for around $50 CDN.  Has anyone
> > successfully rebuilt their hydraulic pump?  I understand the procedure is
> > detailed in the Bentley (which I hope to have by the first of the week)  
> > but I would appreciate any advice based on personal experience that can be
> > 
> 
> 
> 

-- 
============================================
84 Wolfsburg Edition TurboDiesel Scirocco
	http://scirocco.cs.uoguelph.ca/gtd
89 Audi 200 Turbo Quattro Avant
99 A3 Jetta TDI
============================================