MC 2 differences??

[Jim Green]

--- Alan Pritchard <apritchard at seaeye.com> wrote:
> Generally speaking, compression changes usually take
> place in the pistons on
> i5's, or at least the most change, there may be a
> very small amount between
> different heads....
>  -----Original Message-----
> From: 	Beatty, Robert [mailto:BeattyR at ummhc.org] 
> Sent:	05 January 2004 13:00
> To:	'quattro at audifans.com'
> Subject:	MC 2 differences??
> 
> Quick question about the MC 1 vs the MC 2.
> 
> Is it the lower end giving the change in compression
> between the 2 motors or
> is all the head?  In other words, does taking the
> head from a MC 2 and
> putting it on a MC 1 block give you essentially an
> MC 2?


The heads are the same, cams are said to be different.
 The CR is raised in the MC2 by using different pistons.

=====
Jim Green
'89 80q ... slow
'89 90tq .................fast
http://www.mswanson.com/~jgreen/car_home.html

__________________________________
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing.
http://photos.yahoo.com/