Clutch pedal problems - 4kq/QSW

[James Dupree]

I'm sure it could be welded and redrilled but from a shop perspective it would take too much time and would represent a increased risk of failure. At $75/hr, sometimes it is cheaper to buy a part from the dealer. Of course you would not have the cool yellow pedal!
I don't think you could drill out the hole larger and fit a larger diameter pin becuase the clevis on the push rod may not be thick enough.
Take Care
Jim
 

Huw Powell <audi at humanspeakers.com> wrote:

>>>BTDT except on the 3 or 4 i have done it has been the pedal itself
>>>the has wore. It wears at the connection to the clevis for the push
>>>rod. It requires a new pedal.
>>
>>Couldn't the ovalled hole be welded and redrilled?
> 
> 
> Or drilled out larger and a bushing inserted???

Or removed and customized and powder coated yellow??????

-- 
Huw Powell

http://www.humanspeakers.com/audi

http://www.humanthoughts.org/
_______________________________________________
quattro mailing list
quattro at audifans.com
http://www.audifans.com/mailman/listinfo/quattro