Sway bars on 5000cstq?

[Hoffman Anthony J A1C 552 CMS/MXMVC]

I know you can use the front bar off a V8, It is something like 2-3mm
Thicker on the 3.6 cars, and 2mm thicker yet on the 4.2 cars.

Tony Hoffman

-----Original Message-----
From: quattro-bounces at audifans.com [mailto:quattro-bounces at audifans.com] On
Behalf Of Nick
Sent: 07-Jun-2004 2:10 PM
To: quattro at audifans.com
Subject: Sway bars on 5000cstq?


I was looking under the car today and saw the front
swaybar, a massive looking one no doubt, but on the
rear i couldnt seem to find anything that looked like
a swaybar. I have been getting some significant amount
of body roll through long sweeping turns and was
interested to see what kind of suspension upgrades
were possible. I know of the bilsteins and lowering
springs, but does anyone know a source for upgraded
sways, and tower to tower strut braces, as well as any
other chassis braces or where i could fit them if i
had them fabbed?

Thanks for your time.


Nick


	
		
__________________________________
Do you Yahoo!?
Friends.  Fun.  Try the all-new Yahoo! Messenger.
http://messenger.yahoo.com/ 
_______________________________________________
quattro mailing list
quattro at audifans.com http://www.audifans.com/mailman/listinfo/quattro