10V vs 20v Blocks

[Alan Pritchard]

Good point!!!
Been trying to collect my own collection of dimensions on the 5 cyl motors,
if you take any when you get your motor apart, any chance you could post
them and ill start to make my own list.
Thanks.

Best Regards,
Alan Pritchard

Network Administrator
Mechanical Design Engineer
Seaeye Marine Ltd.
+44 (0)1329 289000

 -----Original Message-----
From: 	Marc Swanson [mailto:mswanson at sonitrol.net] 
Sent:	29 June 2004 15:24
To:	Alan Pritchard
Cc:	Bob; quattro at audifans.com
Subject:	RE: 10V vs 20v Blocks


> Another fly in the ointment, possibly...
> Was there not a different big end diameter between motors? Iirc when I
> looked into fitting turbo pistons to my NA block there was an issue......
I
> cannot remember the details.... I think erics aforementioned website has
> more details. 

Even if this was the case (which I can't 100% confirm/deny), it wouldn't
matter to Bob's scenario.  He can just re-use his 3B crank.  I'm 99%
positive that the cranks are the same between 3B and MC1/MC2, as well as
a bunch of other 5cyl motors though.

-- 
-Marc Swanson-
95.5 //S6 Avant
87 4ktq
88 90q
www.mswanson.com/audi