200q Center bearing Repair

[Denis Julien]

The link humanspeaker is popular, most Audifans goes there for infos.
All drive shaft i have here seems identical, just lenght change.
I dont have a num camera yet.

I did rebuilt mine but is used the more complicate way. i used a 0013 Neapco
u-joint witch is smaller, i used spacer to get it fit but it vibrate, i
forgot to mark the CV joint on the prop shaft before remove it, but i did
mark the u-joint fork.

Denis

I want to make my website to put all infos i used for my Audis. ;-)
V8 3.6 A4 coming soon.

----- Original Message ----- 
From: "Paul Cole" <pcole at mn.rr.com>
To: "Denis Julien" <sparkplugvw at hotmail.com>
Sent: Monday, June 28, 2004 10:09 PM
Subject: Re: 200q Center bearing Repair


> On Mon, 28 Jun 2004 15:06:58 -0400, Denis Julien wrote:
>
> >
> Denis,
>  GREAT post- can you add this to the Audifans KB perhaps?
>
> PS- also note that on SOME 200 20vtq center shafts the
> u-joint is pinned in the yoke making removal a BITCH.
>
> Perhaps it's possible to take a picture of the various shafts and
> add that to the KB too-
> I could take a snap shot of my 200 20vtq to add to the collection.
> ( I replaced it with one from an 87 5ktq as it was cheap and
> much easier to repair the u-joint etc)
>
> Again really nice post.
>
> //************************
> Paul R. Cole:
> '91 Quattro Coupe - (spare)Daily Driver @ 265k mi.
> '91 200 TQ 20v- New Daily driver @266k.
> '84 Coupe (358k SAR), '84 Coupe (SAR) , 85 Coupe parts car
> '89 200TQ (WIP- SAR engine  & things) New track toy
> '80 924Turbo ( built to Carrera GTR specs)
> Bloomington,MN
> pcole at mn.rr.com #  Powered by OS/2 Warp 4
> //---------------------------------------
>
>