3B Rod through Block

Emre Washburn yumyjager at gmail.com
Tue Jun 29 12:36:13 EDT 2004


You can not use an older 10v Block, and for bits and peices of 3B's,
call Shokan, I jsut spun a rod bearing in my S4 and Shokan sold me a
set of 5 rods connected to a good crank.

-- 
Emre
92 //S4
90 Cq
40 valves to many!

On Tue, 29 Jun 2004 12:00:21 -0400, Bob <bob at audisport.com> wrote:
> 
> 
> Well Im not exactly sure how it happened. I was on moderate throttle,
> (fairly low boost) when it stumbled a bit. I immediately clutched,
> pulled over and parked it.  I turned it off  right away.
> Pulled the plugs and #2 was full of oil and water. It seems the head
> gasket failed, filled the cylinder with water/oil and hydrolocked.
> Thats the guess of the day. :)
> 
> [SuffolkD at aol.com wrote]
> Wow, how'd this happen?
> I did it in a Saturn at the track, we figured it had oil starvation from
> high RPM downshifting and the whole thing went pop later in the day
> after some "knocking" noises earlier......................
> -Scott by BOSTON
> 
> > Wrom: WZIDRE
> > I just sent a rod through my 3B, and am wondering if   A) Someone has a
> > 3B block hanging around they want to part with or B) If I can get away
> > with a later 10V block
> > Thanks!
> > Bob
> 
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
>


More information about the quattro mailing list