Next planned mod: new aux. gauges, but need some advice

[Huw Powell]

> I'm not sure a T-fitting will work. The problem being that the stock
> sender has a long probe on the end & a spring seems to fit over the
> probe end to provide tension against the pressure relief "valve".
> 
> Dave 87.5 CGT

Dave, that's the oil temperature sender, not pressure.  Though I suppose 
you might run into some similar sort of trouble installing an 
aftermarket oil temp gauge sender in that location.

The two pressure senders are on the side of the block.

-- 
Huw Powell

http://www.humanspeakers.com/audi

http://www.humanthoughts.org/