Drive shaft auto balancer

[Michael Wakefield]

That sounds a lot like the wheel balancers we used in the 60's for Jeep 
wheels. It consisted of a tube approximately 1 inch in diameter, that 
was partially full of lead shot and oil, and was formed in about a 12 
to 14 inch diameter circle. There was a thin plate in the center 
drilled for the wheel bolt pattern. The shot filled tube was at the 
outer rim of the plate. It worked quite well.
Mike Wakefield
Highlands Ranch CO
93S4
97Cab

On Mar 10, 2004, at 11:17 AM, Denis Julien wrote:

> Anyone has the link for the auto balancer for drive shaft.
>
> The unit bolt to the drive shaft into 2 circle that maintain in place 
> a tube fill with something heavy. When the shaft turning the little 
> weight goes where it needs to balance...
>
> i tried on archive by did not find yet.
>
> Denis J
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
>