5ktq turbo to manifold nuts

[Roa, Greg]

It's very possible that this is the case.  I don't know if the proper ones were put on before, as I haven't had the car in my possesion very long.  I've now got the specs, and I'm going to try and source them from a local specialty hardware distributor nearby in hopes of getting them a bit cheaper than what Audi sells them for.  At worst, I'll head to the dealer and buy new ones, but it's worth a shot to check.

Thanks!
Greg Roa
Cincinnati, OH
86' 4kcsq x2
87' 5kcstq
93' 90CS
83' 944



>i think material and construction is almost as important as size in that 
>application.
>(going cheap might explain why you current set is falling off.)
>i would go to audi and get THE replacements...
>
>At 10:01 AM 3/16/2004, Roa, Greg wrote:
>>Would someone with ETKA be able to look up the sizing of the nuts that 
>>hold the turbo onto the exhaust manifold for a 87' 5ktq (MC-1)?
>>I was under the car yesterday and noticed that one of the nuts had backed 
>>3/4 of the way off, and one of the others was missing.  Ack!  I guess the 
>>good part is, it was easy to find the exhaust leak I have in the engine bay....
>>
>>Thanks!
>>Greg Roa
>>Cincinnati, OH
>>86' 4kcsq x2
>>87' 5kcstq
>>93' 90CS
>>83' 944