WG springs

[Adam A. Luy]

No problems there, it should be bigger. When I took out my old spring I
could completely compress it with my hands. NO WAY I could do that with the
new one. When you put the new one in, it's best to have a pry bar or long
handled hammer to hold the WG cap down while you get one or two nuts on.
Then you can put the others on nor problem.

Good luck.

-Adam 


Adam A. Luy - President
Layer 7 Labs, Inc.
6730 East McDowell Road
Suite # 133
Scottsdale, Arizona 85257
USA
Voice - 480.941.0472
FAX - 480.941.0478



-----Original Message-----
From: quattro-bounces at audifans.com [mailto:quattro-bounces at audifans.com] On
Behalf Of jeff redig
Sent: Wednesday, March 17, 2004 9:58 AM
To: quattro at audifans.com
Subject: WG springs

hi all-

ok so i purchased a 1.8 bar WG spring for my 87 5kTQ and went to install it
htis morning and it's considerably larger than the old one.  Longer and a
larger diameter most notably.  At least those are the two that have me
worried.  just making sure that htis is correct for this application.

thanks
jeff redig
_______________________________________________
quattro mailing list
quattro at audifans.com
http://www.audifans.com/mailman/listinfo/quattro

---
Layer 7 Labs, Inc. Email is Certified Virus Free by AVG Anti-Virus.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.619 / Virus Database: 398 - Release Date: 3/10/2004
 

---
Layer 7 Labs, Inc. Email is Certified Virus Free by AVG Anti-Virus.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.619 / Virus Database: 398 - Release Date: 3/10/2004