Jacking Up All Fours Techique

[Richard J Lebens]

4 inches is about the ground clearnace there.  (maybe 5"?? on my 90
20V)
I drive it up on two 2x12'ves put a two foot 2x4 under the body seam
and jack it up with the jack just as far back as necessary to get the
jack stand under the diamond point in front of the jack on the 2x4.



--- Doug Johnson <ur-quattro at msn.com> wrote:
> 
> > -----Original Message-----
> > From: quattro-bounces at audifans.com
> > [mailto:quattro-bounces at audifans.com]On Behalf Of no1of consequence
> > Sent: Wednesday, March 17, 2004 11:42 AM
> > To: quattro at isham-research.com
> > Cc: quattro at audifans.com
> > Subject: Re: Jacking Up All Fours Techique
> >
> >
> > THAT'S EXACTLY WHAT IT SAYS IN THE WORKSHOP MANUAL.  LIFT THE CAR
> BY THE
> > SUBFRAME AND YOU ****-UP THE ALIGNMENT!
> >
> >
> > thats great to know.. but how the F do you jack the car up by the
> > jack point
> > when the jackstand has to go in the EXACT same spot?!?! it's
> > REALLY hard to
> > slide the jack out of the way, whicle it's supporting the car,
> > and slip the
> > jackstand in it's place.
> 
> A 4x4 (101.6x101.6???) along the entire length of the sill, with the
> jack
> near the forward end, then place jack stands beneath the "official"
> jack
> points?
> 
> ~ Doug
> 
> 
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro


__________________________________
Do you Yahoo!?
Yahoo! Mail - More reliable, more storage, less spam
http://mail.yahoo.com