New Front Turn Signal Location with H4/H1? 1990 90q

[Huw Powell]

> Just installed some new H4/H1's and now the dilemma... I am trying to 
> figure out a good installation location for the new turn signals on my 
> 90q... the turn signals I have look like the ones on Huw Powells site: 
> http://www.humanspeakers.com/audi/images/89-90Q-apr01.jpg  .  I pulled 
> the lower grille and did a quick test fit...  but the a/c is in the way 
> of the right side... I am open to getting some different signals, so if 
> anyone with any suggestions or BTDT's I would very much appreciate it!!!

Yes, I think I specify on the site that those type 85 bumper markers are 
too deep to use like I did without dropping that boat anchor off the 
engine.

While I was in the middle of the project, I also had on hand some $20 
cheapo "fog lights" from PEP BOYZ, just in case I preferred them.  That 
is my suggestion, they'll be a lot shallower, and usually have amber 
lenses, and have some sort of mounting hardware as well.

I also had to remove the tow/tie down hook thing and it's bracket from 
the bumper to fit the signals.

You could also just use the city lights and add some side markers (which 
I recommend anyway as a safety feature).  Not sure how visible the city 
lights will be with the headlights on, though.

-- 
Huw Powell

http://www.humanspeakers.com/audi

http://www.humanthoughts.org/