At the end of my rope with this stinkin cis

[Huw Powell]

What year/model, what engine, what system (stock, custom, transplant)?

> Funny thing, decided i'd start tuning in my car this weekend,
> checking all the readings etc... the DPR reads 1.01mA all the time,
> lift the air plate 1.01mA.

Is the engine still running at this point?

> diconnect the temp sensor, 1.01mA. cut the dpr out of the loop
> entirely and jumper across the wires, 1.01 mA.

Sounds like your meter isn't actually hooked up, or working, or something.

> Any body seen this before? The car still runs fine, little rich maybe
>  but that could just be the motor breaking in.

dpr current is controlled by the computer, and is fixed by a temp map
until the engine is warm and goes into closed loop (after 2-3 minutes, 
usually).  Then it is
constantly adjusted in a feedback loop with the oxygen sensor.

If your car is "running fine", I suspect something really out of whack 
in how the meter was hooked up.

-- 
Huw Powell

http://www.humanspeakers.com/audi

http://www.humanthoughts.org/