[urq] Stebro Exhaust

[Ben Swann]

Sources for the 3" mandrel bent ss piping etc. ??

Ben

[Date: Thu, 25 Mar 2004 02:09:09 -0500
From: Mike Fitton <rfitton at vt.edu>
Subject: Re: [urq] Stebro Exhaust
To: Justin <cbrooks22 at cox.net>
Cc: urq at audifans.com
Message-ID: <40628595.1010802 at vt.edu>
Content-Type: text/plain; charset=us-ascii; format=flowed

I gotta chime in on this.  After breaking my exhaust pretty much in 
half, then incurring more damage to it as a result, I've done quite a 
bit of research on this.  The only pre-made 3" mandrel bent system I can 
find is from 2B for $1400.  I'm really not interested in paying $1400. 
So I did a little more looking around.  If one pieces it all together 
oneself, I believe one can replace their exhaust, from the bottom of the 
downpipe back, for about $800.  This includes a new cat, center 
resonator, new rear muffler, and tip.  This is 100% 304 SS, 100% 3", and 
100% mandrel bent.  I haven't gone out and taken any measurements yet, 
so this price maybe be a bit high or low.  Basically it depends on 
exactly how long the exhaust really is and how many bends of varying 
severity there are.  Some day soon I'll go out with a tape measure and a 
protractor and get some harder numbers.  Anyway, that's the short 
version.  If there's demand for the long version, I'll post that as well.

-Cheers!
Mike]