Can not find parts. Need help or advise.
Dave Kase
desmo888 at comcast.net
Sat May 1 19:02:59 EDT 2004
A friend of mine came up with a nice machined bolt on louvers. You can slot
the panel and drill a hole on each side and just screw them on. They are
not cheap ($2 each??) but you do not have to remove the panel and take it to
a shop.
Contact me direct if interested.
Dave Kase
----- Original Message -----
From: <kbogach at comcast.net>
To: "Kneale Brownson" <knotnook at traverse.com>
Cc: <quattro at audifans.com>
Sent: Saturday, May 01, 2004 4:31 PM
Subject: Re: Can not find parts. Need help or advise.
> Kneale, I looked in archives but I did not find any pics or sources.
> Louvers, you said? It is a new word for me. Let me try it ....
>
> Thanks.
> Konstantin
>
> Kneale Brownson wrote:
>
> >If you look in the archives at audifans.com, Konstantine, you should be
> >able to find references and links to pix of various hood louvers for
> >cooling the engine compartment. Probably more reasonable than a scoop
that
> >might reduce the car's wind resistance capabilities and result in a drop
in
> >fuel mileage.
> >
> >
> >
> >At 12:15 PM 5/1/2004 -0400, kbogach at comcast.net wrote:
> >
> >
> >>Hi,
> >>I am looking for gills I can fix on wheel well liner for better air flow
> >>through the oil cooler. I can not find anything I could use there.
> >>Another thing is I need is a air scoop for the hood to lower underhood
> >>temp. Any thoughts or advises will be appreciated.
> >>
> >>Thank you.
> >>
> >>Konstantin.
> >>200tq '89 1.8 bar
> >>200tqa '89 1.8 bar
> >>UrS4 '93 MTM 1+
> >>_______________________________________________
> >>quattro mailing list
> >>quattro at audifans.com
> >>http://www.audifans.com/mailman/listinfo/quattro
> >>
> >>
> >
> >
> >
> >
>
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
>
More information about the quattro
mailing list