Frazzzin Expletive Oil Pan 6mm Alan Key Bolts

Hoffman Anthony J A1C 552 CMS/MXMVC Anthony.Hoffman at tinker.af.mil
Mon May 3 09:30:56 EDT 2004


I've had experiences with these, and I typically use the "CV" socket (8mm
12point), and just pound it in there. You can also use a Torx socket, but
I'm not sure of the size.

Tony Hoffman

-----Original Message-----
From: David Thoresen [mailto:david at epicfoto.com] 
Sent: 02-May-2004 9:30 PM
To: quattro at audifans.com
Subject: Frazzzin Expletive Oil Pan 6mm Alan Key Bolts


Well got all the bolt off the oil pan this afternoon except for the 6mm 
alan key bolts by the tranny... I managed to strip one of them, and 
didn't dare try the others till I get a GOOD alan key that will fit on 
a 3/8" or even a 1/2" socket wrench... Hope the guys at tool town will 
have something to help remove that stripped alan key bolt, I am tempted 
at this point to bang in a 1/4" alan key in there :o(

No way am I going to attempt the tranny....

Banging head on the wall,
David
90q20v

_______________________________________________
quattro mailing list
quattro at audifans.com http://www.audifans.com/mailman/listinfo/quattro


More information about the quattro mailing list