Frazzzin Expletive Oil Pan 6mm Alan Key Bolts SUCCESS!!!!!

[Ameer Antar]

Congrats! About the loctite, I don't think you need loctite at all. No mention in Bentley and didn't see any remnants when taking mine out. The oil pan bolts have teeth under the head to keep them in place. The torque in the Bentley is higher than most M6 bolts on the engine, so that's a factor too.

-Ameer

----Original Message----
Date: Tue, 4 May 2004 15:16:10 -0700
From: David Thoresen <david at epicfoto.com>
Subject: Re: Frazzzin Expletive Oil Pan 6mm Alan Key Bolts
	SUCCESS!!!!!
To: audi at humanspeakers.com
Cc: "'quattro at audifans.com'" <quattro at audifans.com>
Message-ID: <A5C528CA-9E18-11D8-BE1E-003065CCE040 at epicfoto.com>
Content-Type: text/plain; charset=US-ASCII; format=flowed

Well I finally got the rounded bolt remover set from sears... and the 
first bolt came right off with that...  (grrrr) the second that I 
started to cut off with a dremel, but needed to be drilled with a 1/2" 
bit to finish off that one.  Once the oil pan is off the stud from that 
came right off!

Thanks Again For everyones help!!!!

Now to put it all back together!

I guess loc tite blue on all the bolts should be ok?!

Thanks Again!

David
90q20v



------------------------------