Cant find the Alignment/Steering problem on a 4ksq after a

[John Larson]

Tyson said:  "Thing is currently soaking in WD40, not sure if I will be able
to
break it lose..."

If you're counting on WD 40 ("Water Displacer 40") to loosen the rusty
components, better bring a lunch or 5.  It ain't gonna happen.  Try a
penetrating oil such as Liquid Wrench (a pretty mild one), Kroil (my fave),
Wurth Rost Off, Blast Off, PB Blaster, or any of the other good ones.
Despite popular belief (engendered by years of misinformation), WD 40 isn't
even close to the thing to use for this purpose.

HTH, John