90q brake conversion & CO adjustment question

[Denis]

Audi 90Q has same tranny (01A) as 100Q and the inner are small  CV joints,
100mm with small bolts. My 100Q tranny has 100mm inner CV joint.
CV shaft are not the same lenght on 90Q(and 100Q)  with the 01A tranny, and
are the same lenght on 4000Q (or 5000TQ)  with 016 tranny.

Not sure but i think the CV flange on 016 tranny from 4000Q has small inner
CV joint. But 016  inner CV joint  on 5000TQ are big one 108mm BTDT

Nates did a swap of 016 tranny into a 80Q he knows well what fit on what.
See Nates on Motorgeek.com most of time.

I asked many time the inner CV shaft and joint , small or big, long or short
,,, for 5000TQ, 4000Q and 90Q NEVER got BTDT asnwers,,, only tought from
ETKA with lots of mistake on it.

So dont trust ETKA for those infos.


Denis

----- Original Message -----
From: Richard J. Andrews <audinutt at excite.com>
To: Jim Dupree <jdupree914 at sbcglobal.net>
Cc: <quattro at audifans.com>
Sent: Wednesday, May 12, 2004 11:36 AM
Subject: Re: 90q brake conversion & CO adjustment question


> I am not sure... i think they are a different size if i remember
correctly..
> I think the 90 has larger bolts that hold the axle to the trans..
>
> -richard
>
>
> At 01:31 AM 5/9/2004, you wrote:
> >Richard,
> >My plan was to use the complete front suspension from the 90q, struts,
> >a-arm, ball joints, brake calipers, rotors, sub-frame, axles & CV joints.
> >the only part I planned to reuse from the 4kq are the springs and the
almost
> >new turbo boge gas strut inserts.  Two things I was concerned with was if
> >the inner CV joints from the 90q will bolt to the 4kq trans and if the
axle
> >length was OK.
> >Thanks
> >Jim
> >
> >----- Original Message -----
> >From: "Richard J. Andrews" <audinutt at excite.com>
> >To: "Jim Dupree" <jdupree914 at sbcglobal.net>
> >Cc: <quattro at audifans.com>
> >Sent: Saturday, May 08, 2004 4:07 PM
> >Subject: Re: 90q brake conversion & CO adjustment question
> >
> >
> > > The 90 struts bolt on, but you need to change the following parts from
the
> > > 90...
> > > brake rotors and calipers, ball joints, and outer cv joints....
> > > i'm about to bolt up my g60 calipers...
> > > nice upgrade though..
> > > larger balljoints and wheel bearings.
> > > and better brake upgrade options.
> > >
> > > -richard
> > >
> > > >Richard,
> > > >Were the 90q struts a direct bolt on?
> > > >I have a 1985 4kq that needs frt. control arm bushing, frt. wheel
> >bearings,
> > > >at least 1 frt. CV joint and the frt. brakes are thin too. I have a
1988
> >90q
> > > >torn apart in my drive way and was contemplating replacing the wheel
> > > >bearings, control arm bushings, ball joints, brake pads & rotors on
the
> >90q
> > > >frt. end. Cleaning and repacking (or replacing) the CV joints from
the
> >90q
> > > >and then installing it all in the 4kq.
> > > >What insight can you give me?
> > > >Thanks
> > > >Jim
> > > >1984 4kq
> > > >1985 4kq
> > > >1985 5kt
> > > >
> > > >----- Original Message -----
> > > >From: "Richard J. Andrews" <audinutt at excite.com>
> > > >To: <quattro at audifans.com>
> > > >Sent: Monday, April 26, 2004 9:27 PM
> > > >Subject: 90q brake conversion & CO adjustment question
> > > >
> > > >
> > > > > Hello all,
> > > > >
> > > > > I've been super busy and off the list for a while.
> > > > > Been working steady at getting the old 4kq nice again.
> > > > > i currently have converted to front 90q struts and came upon some
g60
> >dual
> > > > > piston calipers..
> > > > > I am looking at putting these on my front end along with coupe
quattro
> > > >rotors.
> > > > > It looks like a direct bolt on... Anything i should watch out for?
> > > > > also...
> > > > >
> > > > > does anyone have a procedure on setting the CO mixture i know how
to
> >tune
> > > > > it with the Diff pressure regulator.
> > > > > but do i have to clamp off hoses or disable ISV?
> > > > >
> > > > > Thanks a bunch!
> > > > >
> > > > > -richard
> > > > >
> > > > > _______________________________________________
> > > > > quattro mailing list
> > > > > quattro at audifans.com
> > > > > http://www.audifans.com/mailman/listinfo/quattro
> > > > >
> > >
> > >
>
>
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
>