89 80 trans drive flange replacemnt

[George Selby]

At 07:10 PM 11/10/04, you wrote:
>Screw 2 or 3 long bolts on the flange.
>   Screw them to the case (put a block between the bolt and the tranny to 
> protect it) until the flange come out.
>   I did it on my 90 1988, and i used bars on my 100Q.


I like this idea!  I can try with the old bad trans first, but I think this 
will work.  This method is used to pull off many Japanese-made-car brake 
drums and rotors.

George Selby