Subframe, Swaybar and Control Arm Replacement Nuts and Bolts

[sdewitt at stx.rr.com]

The ETKA shows that information.

----- Original Message -----
From: Brett Goetz <brett.goetz at rtp.ppdi.com>
Date: Thursday, November 11, 2004 11:25 am
Subject: Subframe, Swaybar and Control Arm Replacement Nuts and Bolts

> I've been reading about getting replacement nuts and bolts for the 
> front 
> end of my car online from Bolts Depot or the local John Deere or 
> Cat 
> dealer.  I would like to do it, but my '88 5KCST is my only form 
> of 
> transportation.  Does anyone out there know the length, thread and 
> strength  for the following parts?
> Subframe bolts
> Front Swaybar bolts
> Rear Swaybar nuts
> Control Arm nuts and bolts
> I have replaced all of the bushings and the control arms and 
> should have 
> replaced them at that time, but I didn't.  Now I'm dealing with a 
> squeaky front end because of old hardware that won't torque right. 
> This 
> way I can order them online without taking my car off the road.
> Thanks
> 
> ______________________________________________________________________
> This email transmission and any documents, files or previous email
> messages attached to it may contain information that is 
> confidential or
> legally privileged. If you are not the intended recipient or a person
> responsible for delivering this transmission to the intended 
> recipient,you are hereby notified that you must not read this 
> transmission and
> that any disclosure, copying, printing, distribution or use of this
> transmission is strictly prohibited. If you have received this 
> transmissionin error, please immediately notify the sender by 
> telephone or return email
> and delete the original transmission and its attachments without 
> readingor saving in any manner.
> 
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
>