FW: Tubular header for MC?

[sdewitt at stx.rr.com]

The V8 cylinder spacing is different. You maybe able to do that with a 20V but not a 10V.

----- Original Message -----
From: "Livolsi, Stephane" <Stephane.Livolsi at investorsgroup.com>
Date: Tuesday, November 16, 2004 12:38 pm
Subject: FW: Tubular header for MC?

> What got me thinking about it is that I saw a custom header with very
> short runners made for a V8.  I thought - add another runner and you
> could slap that on an I5...with a bit of mod, of course...
> 
> -----Original Message-----
> From: sdewitt at stx.rr.com [sdewitt at stx.rr.com] 
> Sent: November 16, 2004 10:30 AM
> To: Livolsi, Stephane
> Cc: quattro at audifans.com
> Subject: Re: Tubular header for MC?
> 
> 
> Nope, none that I've seen. It's probably more difficult than it looks.
> 
> ----- Original Message -----
> From: "Livolsi, Stephane" <Stephane.Livolsi at investorsgroup.com>
> Date: Tuesday, November 16, 2004 12:22 pm
> Subject: Tubular header for MC?
> 
> > I know Javad has a custom tubular header on his car, but he is 
> also 
> > running efi and has a lot of room. That one won't fit on a 
> 'stock' MC.
> > 
> > What I was wondering is if anyone has had a custom header made 
> up that
> 
> > would bolt into the stock position on an MC - It looks like it 
> > shouldn'tbe too hard.
> > 
> > 
> > I have someone looking into it right now and will be getting to me
> > witha price quote, but in the meantime I just thought I'd throw 
> it out
> > there...
> > _______________________________________________
> > quattro mailing list
> > quattro at audifans.com
> > http://www.audifans.com/mailman/listinfo/quattro
> > 
> 
> 
> 
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
>