Wheel Stud Conversions

[Kent McLean]

Bluemaxww1 at aol.com wrote:
>  
> I went to the hardware store also.  Couldn't find a bolt long  enough without 
> a lot of thread length.  Figured running the aluminum wheel  over steel bolt 
> threads, would shave aluminum off the wheel.  

A layer of JB Weld ought to smooth out some of the threads.
Of course, that makes the $2 solution a $10 solution, but
still cheaper than $30.

--
Kent
'94 100 S Avant
'89 200 TQ, "Bad Puppy", needs a new home