how to determine hose sizes??

[Hoffman Anthony J A1C 552 CMS/MXMVC]

You could also try spokanehose.com. They fixed my hoses, and may be able to
tell you what size. Then ask them If they'll sell you some.

Tony Hoffman 

-----Original Message-----
From: quattro-bounces at audifans.com [mailto:quattro-bounces at audifans.com] On
Behalf Of Ameer Antar
Sent: 27-Oct-2004 11:55 PM
To: Mark Novak
Cc: Quattro List
Subject: Re: how to determine hose sizes??

Hose size is usually talked about in ID inches. You won't find many places
that stock metric hose; even the dealer here in CT only has 2 different
rolls of vac. hose...nothing over 3-4mm. So you'd have to special order the
hose from Audi, wait, and pay big buck$$. I think one of the vac hoses I
asked about was like $5 a foot, which is totally BS. I wouldn't waste
time/$$ on an online store either. I found after replacing almost all of the
hoses on my car that there's not really any difference between metric and US
sizes. They're not exact matches, but it doesn't matter since the hose will
be clamped anyway. I replaced the same hose you mentioned and the one I
found was pretty much exactly a perfect fit. I wrote about this in an
earlier post which I copied below:

The return hose to the reservoir is easy and cheap to replace. You need
about 2' of either 5/16" or 1/4" hose.. I forget what I used (I think it was
5/16"). Any hose will do since this is a return line, not high pressure.
Fuel hose is fine. I was able to dig through the junk bin at the FLAPS and
found exactly what I needed so that one was free...it was only worth like $1
something to them anyway if it came off the spool.

good luck.
-Ameer


   ----Original Message----
   Date: Wed, 27 Oct 2004 09:56:11 -0600
   From: Mark Novak <mnovak at fs.fed.us>
   Subject: how to determine hose sizes??
   To: quattro at audifans.com
   Message-ID:
 
<OFA0C4B57F.2BDBC6DB-ON87256F3A.00570069-87256F3A.00578ACD at notes.fs.fed.us>
   	
   Content-Type: text/plain; charset=US-ASCII
   
   Just a quick question---------When one talks about hose sizes----is the
   measure the inside diameter of the hose in question.  And secondly, am
   considering the replacement of the non pressure hose going from the
   reservoir to the brake pressure accumulator and was wondering how one
knows
   what hose size to order up---are these hose sizes known at the dealers
   parts catalog???  Or do you just have to measure them once you have the
   hose to measure????  Noticed a place called mdmetric.com that has all
kinds
   of hoses and thought about ordering some hoses from them.
   
   
   
   ------------------------------

_______________________________________________
quattro mailing list
quattro at audifans.com
http://www.audifans.com/mailman/listinfo/quattro