87.5 CGT Panhard Rod -- bent or straight?

[Jonathan Monetti]

Ruh roh, raggy.

Does anyone know of any FWD Audi panhard rod that is, in fact, angled?  I
wonder if some wrench somewhere did a mickey-mouse substitution with another
VAG part.

Worse, I'm wondering why on earth it would be changed in the first place, as
it's pretty much a no-fail part.  Hopefully it was a whacking that somehow
ended up looking factory correct.

Thanks Dave.


JM

> ------------------------------
>
> Message: 2
> Date: Fri, 29 Oct 2004 12:38:13 -0400
> From: David <duandcc_forums at cox.net>
> Subject: Re: Re: 87.5 CGT Panhard Rod -- bent or straight?
> To: "Jonathan Monetti" <jmone3036 at earthlink.net>,
> 	<quattro at audifans.com>
> Message-ID:
> 	<20041029163802.YFRQ5658.lakermmtao09.cox.net at smtp.east.cox.net>
> Content-Type: text/plain; charset=ISO-8859-1
>
>
>
> Confirmed. The panhard rod on my 87.5 CGT is straight as an
> arrow. Sounds like your car took a whack or it was MacGyvered to fit.
>
>
> Dave
>
> 1987 Coupe GT Special Build 2.3
> All in SE VA
>
>
>