Coolant dash warning light flashing... HELP!!!

[Kneale Brownson]

Some of these reservoir sensors are particularly sensitive.  You need to be
certain your coolant is above the "min" mark.

Maybe you have an air bubble in the system?   Maybe you need to "burp" the
reservoir cap. Feel the hoses to be certain hot water is getting through
the radiator.  If so, and your gauge reads normal, you may just have a
failing sensor.


At 05:26 PM 9/8/2004 -0400, B. wrote:
>Hello all,
>
>I'm facing a weird dilemma, My 89 200 TQ 10V has been expiriencing 2nd day 
>in a row. This is the situation. My coolant warning light came on after 
>draining the coolant and refilling it. I then drove the car for a bit but 
>the light didn't turn off. Instead it stays on flashing but not chiming. I 
>do know that this car has the warning light for the coolant level reading 
>low or temperature being too high as per glove manual but I noticed the 
>analog gauge to the left of the speedo reading below mid level and it 
>doesn't reach abouve that point in any type of driving. My concern is 
>driving the car? What could this be? has anyone had this problem? What 
>should I check. Help please!!!