91 200 20v No Start

Michael, Dave Dave_Michael at maxtor.com
Thu Sep 23 11:27:49 EDT 2004


Not sure if it's the same on the 20V, but on my 90 200qa 10V I had a
starting problem caused by the alarm system. There is a relay in the
relay/fuse box that  is part of the alarm. Mine was sticking "open", so
I would get no click or anything else. I found no power at the solenoid
during start, and using the Bentley, started tracing this back to the
ignition switch. Found no power coming out of the relay. Solution was to
remove the relay and Jumper the correct terminals. No problems since.

Dave
200QA 204K
M3/4 78k
MCS 14k


More information about the quattro mailing list