So I am a dumbass and cut my CAS pick-up cables...

[Tony Hoffman]

The key here is the outer shielding and good connections. Make sure to get some type of wire mesh around the outside of the wires. Otherwise, stray voltage will mess with the signals. The only thing I can think of off the top of my head is metal screen, but I'm sure somebody will come up with a better idea.

Tony Hoffman
 
Oh, and they are about $115 each from bimmerzone.com
 

Ben Swann <benswann at comcast.net> wrote:
They are sheilded, possibly even a twisted pair, but I would think that the
inner wires could be reattached and crimping would be fine. Then just do a
careful jub of taping the inner wires (I use liquid electrical tape, let
cure and wrap once with regular e tape just to be sure they don't contact.

Then try to get a good wrap around with the shield wire.
		
---------------------------------
Yahoo! Messenger
 Show us what our next emoticon should look like. Join the fun.