4kq suspension raise
David
duandcc_forums at cox.net
Mon Apr 11 10:22:19 EDT 2005
Another way to raise it if you only need a couple inches is to use typ89 20V stock springs. Those springs on a typ85 will raise it about 2". Also typ89 20V lowering springs maintain stock ride height (within 1/2 inch) on a type 85 (I'm running a set of Cq lowering springs on my CGT).
Dave
1987 CGT 2.3
SE VA
>
> From: Tony Hoffman <tfh400036 at yahoo.com>
> Date: 2005/04/11 Mon AM 01:25:54 EDT
> To: Ryan Moon <moon at velaru.net>, quattro at audifans.com
> Subject: Re: 4kq suspension raise
>
> Ryan,
>
> Yep. Easy to do, somewhat hard to align afterwards. Depends on how far you want to go.
>
> I used another spring perch from a 4000. Set it on top of a piece of 5" pipe, cut to the hight you want to raise it. In my case, I went about 1.5". You can also use the ground control coil overs, which are height adjustable. The only drawback, if you go too far, is the suspension travel. It will only go down as far as stock, so large holes and dips will cause bottoming out a lot more.
>
> Tony Hoffman
>
> Ryan Moon <moon at velaru.net> wrote:
> Has anyone on this list ever raised the suspension on their street
> driven 4kq? If so, how ?
>
> Thanks
> Ryan Moon
>
>
> ---------------------------------
> Do you Yahoo!?
> Yahoo! Mail - Helps protect you from nasty viruses.
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
>
More information about the quattro
mailing list