AC question 5KCSTQ

[John Sherrow]

Thanks Bob. I checked the relay at work. It's OK

 I jumped across the relay contacts with the relay removed to run the compressor.

The programmer isn't switching the relay coil to ground. One side does have 12 volts. Ti's Bentley diagram sounds a little different than what I thought I saw so I'll double check tomorrow.

There are a few things which I believe can keep the programmer from switching on the compressor. WOT etc.

----- Original Message ----- 
  From: Robert Myers 
  To: John Sherrow 
  Sent: Monday, April 11, 2005 10:50 PM
  Subject: Re: AC question 5KCSTQ



  Sounds like the relay could be the problem.  Jumpering it caused the compressor to operate and the system blows cold.

  At 10:48 PM 4/11/2005, you wrote:


    Believe me I wish it was the relay.
     
    ----- Original Message ----- 

      From: Robert Myers 

      To: John Sherrow 

      Sent: Monday, April 11, 2005 10:46 PM

      Subject: Re: AC question 5KCSTQ



      Failed relay.


      At 10:32 PM 4/11/2005, you wrote:

        Besides

        bad control head what can cause the clutch not to engage?



      Bob

      Http://Chips-Ur-S.com



    -- incoming mail is certified Virus Free.
    Checked by AVG Anti-Virus.
    Version: 7.0.308 / Virus Database: 266 - Release Date: 4/11/2005

  Bob
  Http://Chips-Ur-S.com