Replacing windshield antenna with fender mounted Antenna

[Fred Munro]

Note that the Audi power antenna is a PITA. I have one on my '94 S4. Good
reception, but unless you routinely clean the mast (and that means every
time you retract it), the mast eventually jams up. I'm on my third mast and
I now remove and lube it twice a year and wipe it every time I retract it -
that seems to extend it's life. If you want to install a power antenna, try
to get a different model that uses a stainless steel mast, not the chrome
plated brass one Audi uses.


JMHO

Fred Munro
'94 S4

-----Original Message-----
From: quattro-bounces at audifans.com
[mailto:quattro-bounces at audifans.com]On Behalf Of Mark J. Besso
Sent: April 26, 2005 6:51 PM
To: SJ; quattro at audifans.com
Subject: Re: Replacing windshield antenna with fender mounted Antenna


SJ,

Audi had a TSB covering exactly that problem.  It listed all the components
necessary for installing a power antenna on the rear ¼ panel.  You might
want to seek out your friendly local dealer for a copy.

~Mark


----- Original Message -----
From: "SJ"
Subject: Replacing windshield antenna with fender mounted Antenna


<snip>
> Instead of screwing around with the amplifier in the back and trying to
> figure out what the problem is, I'd rather install a standard rear fender
> mounted antenna.
> Are there any issues with the antenna cable connections at the radio?
> Do I need an antenna cable interface adapter?
> Can I just disconnect the front windshield antenna from the radio and only
> use the rear antenna?
> Do I need a termination resistor or short at the disconnected front
> antenna
> input jack?
>
> Any BTDT would be appreciated.
>
> SJ

_______________________________________________
quattro mailing list
quattro at audifans.com
http://www.audifans.com/mailman/listinfo/quattro