wheel bearings - "hub shark"

[Denis]

I carefulley remove the rust and go to machine shop and press it, takes 30 sec, 10$ that s all.
Never got problems , everything was fine.

Ðenis
www.efi4tuning.com
  ----- Original Message ----- 
  From: Aaron Jongbloedt 
  Cc: quattro at audifans.com 
  Sent: Thursday, August 18, 2005 10:49 PM
  Subject: Re: wheel bearings - "hub shark"


  I am surprised no one brought up the Schely one, which the Hub Shark is 
  based
  off of.
  http://techtonicstuning.com/viewpart.asp?partnum=635.000

  I have been involved w/ 6 wheel bearing installs, and not a single one has
  gone perfectly!  Something always goes wrong.  I do think that it has more
  to do w/ that darn black cloud that follows me every where I go, and the
  steep learning curve I seem to have to go through!
  ------------------------------
  Aaron Jongbloedt  "YoungBlood"
  mailto: jungle at hickorytech.net
  url:    http://blacksunshine.freeservers.com/
  url: http://testsvr.sabis.com
  "Try a little Black Sunshine."
  ==============================
  careful of your thoughts--they become words
  careful of your words--they become actions
  careful of you actions--they become habits
  careful of you habits--they become your character

  The opinions reflected in any hint of
  communication (coherent or otherwise)
  that I have ever attempted in my entire
  life are entirely my own.  $1.95 will
  get you and I, my opinions and two cups
   of coffee.
  ==============================

  ----- Original Message ----- 
  From: "Drew Boyd" <qu4ttro at gmail.com>
  To: <cobram at juno.com>
  Cc: <SuffolkD at aol.com>; <quattro at audifans.com>
  Sent: Thursday, August 18, 2005 8:12 PM
  Subject: Re: wheel bearings - "hub shark"


  > As someone who works at a shop I swear by this thing!!!
  >
  > and the cheapo one may survive for 3-5 bearings (I go through OTC ones
  > surprisingly quickly (the long nut and bolt part)) so that would
  > certainly pay for itself.
  >
  >
  > On 8/17/05, cobram at juno.com <cobram at juno.com> wrote:
  >> The Instructions that come with the tool...and common sense?
  >>
  >> BCNU,
  >> http://www.geocities.com/cobramsri/
  >> That's a rather tender subject. Another slice, anyone?
  >>
  >>
  >>  SuffolkD at aol.com writes:
  >>
  >> > Who's going to clue him in about where to press on the bearing
  >> > races?
  >> > Like the outer edge only.........................................NOT
  >> > the inner?
  >> > -Scott by BOSTON
  >> _______________________________________________
  >> quattro mailing list
  >> quattro at audifans.com
  >> http://www.audifans.com/mailman/listinfo/quattro
  >>
  > _______________________________________________
  > quattro mailing list
  > quattro at audifans.com
  > http://www.audifans.com/mailman/listinfo/quattro
  > 

  _______________________________________________
  quattro mailing list
  quattro at audifans.com
  http://www.audifans.com/mailman/listinfo/quattro