BOOM! then no go...PHOTOS...Answer.........

[Ed Kellock]

So did the CV fail or did the bolts just come loose?


On Wed, 02 Feb 2005 10:47:54 -0800 (PST), SuffolkD at aol.com
<SuffolkD at aol.com> wrote:
> Photos here:
> http://www.quattro123.com/AxleCV.htm
> -Scott by BOSTON
> 
> > I had time to crawl under the car on the driveway.
> > Brother with foot on brake, third gear and clutch let out.........I looked
> > underneath like a Darwin candidate.
> > answer was against the exhaust pipe Y................
> >
> > The INNER CV axle joint held to the tranny flange by the eight or so tripple
> > square bolts was "off", bolts loose and separated from the tranny flange.
> > Tranny spins and car no go.
> >
> 
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
>