Broken Wheel Bolts
TWFAUST at aol.com
TWFAUST at aol.com
Thu Jan 27 19:18:41 EST 2005
Any guesses as to why the bolts broke? No. Audi bolts just seem to freeze.
Any suggestions for removing the broken off stuff? Yes.
If you have a drill press, I recommend drilling the smallest reasonable hole
right through the junction of the male and female threads. Then add a little
more penetrating oil. Don't know if this really helps, but it seems to. Then
drill as large a hole as possible, as close to center as possible in the bolt
ends. Then use the extractor. I recommend the extractors which are short and
have a socket head. Snap On makes these and I believe Sears is now. If you use a
shaft type extractor and it breaks, you are then faced with drilling through
hardened steel to insert another extractor. A little, or a lot, of heat also
helps.
Tom Faust
More information about the quattro
mailing list